Highway pegs for an Interstate

peg2.jpg (102091 bytes) pegs1.jpg (83720 bytes)

The lower mounts are GL 1200 Highway Board mounts. The pegs are "Add On" brand pegs. The only problem with this setup is the bolt that holds the peg on is larger than the bolt hole in the lower mount. You have to drill out the hole in the mount and install an Allen head cap screw . Also, the stainless steel Allen bolts I used had heads slightly   larger than the hole, so I had to reduce the diameter a little. But they mount straight and fit very well. Great for us "short in the leg" guys. I'm 5'10" they fit me fine.